Wood Formwork Ply Board WBP Glue
  • Seller Shouguang Haike Wood Industry Co., Ltd.
  • Min. Order 1000 Piece/Pieces
  • FOB Price US $11.5-18 /Piece

Item Details

Port: qingdao port or lianyungang port
Supply Ability: 5000 Cubic Meter/Cubic Meters per Month
Payment Terms: L/C,T/T

Product Description

Product Description

wood formwork ply board.WBP glue poplar core film faced plywood for construction real estate use

Film is called Impregnated paper.it is made of special paper soaked amino resin or phenolic resin, curing and drying to a certain extent dipped paper. The film Has the characteristics of wear, corrosion, anti-stress.

usually film is black film,brown film,red film and film with logo.

Coated Paper is widely used in the production of film faced plywood, film faced plywood can make this building smooth, flat and easy to use, so no secondary plastering, shorten the construction period; may restrict the discharging amount of harmful gases, reducing buildings pollution; coated paper waterproof paint can also greatly extend the life of the diaphragm, which allows the template to reuse.

we use the good quality film.so after using,dont leave anything on the wall.

Film faced plywood glue have WBP(MELAMINE).MR glue.The glue material is Formaldehyde and urea.

WBP glue is short for "Water Boiled Proof"glue."Water Boiled Proof" mean weatherability, resistance to boiling water or steam treatment.WBP glue is not a certain kind of glue. WBP is a certain type of glue properties, features or characteristics.

WBP glue have melamine glue and phenolic glue. Generally, ordinary WBP glue in boiling water can be kept for about 4 to 8 hours not open. Good WBP glue over 10 hours can be maintained or even 20 hours in boiling water not open. Standard phenolic plywood glue can maintain about 24 to 72 hours in boiling water is not open. The best phenolic glue is permanent glue, plywood corresponding in boiling water is difficult to open

MR glue is Moistureproof glue

Detailed Images
black film, red film local brown film
poplar,pine,hardwood( Eucalyptus), combi, birch
poplar,pine,hardwood( Eucalyptus), combi, birch
Thickness tolerance
+/_ 0.5mm
construction or formwork
pallet packing and loose packing
Min order
Delivery time
within 15days after receiving 30% T/T deposit or L/C at sight
T/T or L/C at sight
Anti-abrasive, winkles-resistant and anti-erosive, water&boiling proof and repeat-used etc
Film Faced plywood production technology:

1,use high-grade cold-hot pressing do forming Technology ,super bonding strength, turnaround times leading the way

2, with a sanding machine sanding sheet, protection thickness uniformity, board formation leading the way

3, in strict compliance with quality template 11 production processes, quality and stability leading the way

Film Faced plywood materials used

1, to enhance the smoothness of film faced plywood, waterproof, abrasion resistance stronger

2, the entire large pieces board core material, thickness uniformity, clear lines, the number of high turnover

We in good faith as the goal. In the production to shipping, our product requirements and very strict control, from timber harvesting to Rotary cut ,drying, criss-cross layout, no distortion, no open plastic. Strictly control the quality of raw materials, stable quality materials and excellent thickness uniformity of product quality to provide a strong guarantee.


Close to the film plywood wooden vertical placement, seams to minimize, to the formation between the board and the board. Slab is flush with putty or sealed with adhesive tape, paste or slurry to leak pollution board edge, non-collision with a hard object, the crowbar beating or reinforced in the board drag.

1, the top mold: first lateral spacing of about 1.2m square wood shop on the scaffold, and then laying wooden vertical spacing of 0.4-0.6m; are pouring quan thickness exceeds 200mm, spacing should be adjusted appropriately small.

2, wall mold: Film Faced plywood before laying three vertical wooden poles, then laid two wooden cross coupling, leaving a good position through the wall screws, stand a good bracing. Can be connected to form a modular transverse flute steel.

Large wall mold, can also be directly lifting, easy removable single piece of plywood covered.

3, beam, column mode: by size cut open a template, top left bolt position through walls, columns scaffolding sides lock mode can be short, vertical good bracing.

4, surface treatment: a layer of release agent before use in coating the surface evenly coated plywood to keep the surface clean release, film faced plywood to extend life and improve the quality of the concrete surface Amount.

5, storage yards heap: film faced plywood demolished immediately after the clean up with a brush, plastic or wooden scraper and other non-metallic tools clean, skids under side, the corners are aligned stacked on a flat surface

6, The board shall not be in direct contact with the board to keep the template ventilation to prevent sun, rain and regularly check, so you can continue the life of coated plywood!
production line

Veneer finishing - glue - assembly - Preload - hot pressing - Sanding - coating - secondary hot pressing - cutting edge - packaging and warehousing

Packing & Delivery

1. packaging :

1) Inner packing: Inside pallet is wrapped with a 0.20mm plastic bag

2) Outer packing: Pallets are covered with 3mm package plywood or carton and then steel tapes for strengthening;

2. Shipping

1).within 15days after get the deposits

2).best service with cheap sea freight

Our Company

shouguang haike wood insustry co.,ltd has its own factory. we are specializing in film faced plywood,commercial plywood,mdf and kitchen cabinet.etc.we have more than 10 years experience.

we can service good price,good quality and good service to client.

Our Service

1, what is your company’s advantage?

We always supply the better price on the same quality level, and try our best to save the client’s every cent.we export about 50 containers per month,tea years experience.

2, What is your MOQ?

Our MOQ is usually 20ft container or 40ft container or the quality client require

3, What is your delivery time?

The delivery time is usually within 15days after received your deposit.

4,can u do OEM?
Yes,we can do any logo client need


welcome to visit our factory,and if you are interested in our product,please Do not hesitate to tell me.and we can send u sample free.

best regards!

contact us
name:Jenny Xia